Here is some additional information on how you can make the most out of your UV Sanitizer!
UV Sanitizer Review
What you receive
Your sanitizer comes with 3 pieces.
This device uses 9 UV LEDs to sanitize. Ultraviolet light (with a wavelength of 260nm-280nm) destroys DNA & RNA and has a proven sanitation rate of up to 99.9%.
The Cleaning Process
To use, place items inside the box, and press the top button once to activate the sanitizer for 1 minute. If you hold the top button (for 1 second), the sanitizer will work for 5 minutes. We recommend sanitizing for 5 minutes in most cases. The quick (1 minute) clean should only be used for very small items or things that have been cleaned recently.
If you open or move the cover during cleaning, the sterilization process will stop automatically (UV light turns off) to prevent UV leakage. To restart, close the lid and re-select your cleaning time.
IMPORTANT! Please be gentle when pressing the button. Excessive force will cause the button to stick and make the unit inoperable. This is a wear-and-tear issue and voids the product warranty.
The device has a diffuser for Essential Oils. Put a drop in the diffuser, and start the sterilization process.
Note: If using Essential Oils (optional), add only 1-3 droplets into the diffuser immediately before activating the sanitizer for a 5 minute clean.
Powered by our Qualcomm Quick Charge 3.0 power adapter, the top of the device provides up to 15W of wireless charging. It supports devices such as:
- iPhone 12/11/11 Pro/11 Pro Max/XS Max/SE/XR/XS/X/8/8 Plus
- Samsung Galaxy Note 10/Note 10 Plus/S20/S20+/S10/S10 Plus/Note 9/S9+/S9/Note 8/S8/S8+/S7/S7 Edge
- AirPods 2, AirPods Pro, Samsung Galaxy Buds, Samsung Galaxy Buds Plus, Pixel Buds
- All Qi-enabled devices
- Apple Watch uses the mFi wireless charging standard, and cannot be charged using this device.
Note: The charging coil is on the center of the top panel. A device needs to be placed in the middle in order to wirelessly charge.
The charger comes with an 18W power adapter, which we recommend using with this device. If you do not use our power adapter (you can plug the USB cable into any powered USB port), be careful to make sure it supplies enough power for the UV lights or Qi charger. We only guarantee the proper functioning of this device when used with our power adapter.
Note: To ensure maximum power is available for wireless charging or sterilizing, we recommend you only do one of these at a time. Doing both at the same time will reduce the efficiency and effectiveness of both processes.
How to Clean Your UV Sanitizer
Like all electronic equipment, gently wipe with a dry microfiber cloth. Do not use chemicals or harsh material.
If you have any other questions about your watch band, please contact us.