Here are some important information that will ensure your watch band continues to look and perform well for you!
Your band comes with 3 pieces.
* The above picture is an example only. The color/style shown may be different from what you purchased. Apple Watch not included.
This video will show you how to remove your original watch band.
This video will show you how to install your new watch band:
Important: Please remember to attach the band to your watch, with the metal middle piece on the under-side of the watch. When the adapter is properly inserted into the groove you should hear a soft click as the watch locks onto the band. If you put it the wrong way around or the band does not "click" in, the band is probably not attached correctly and your watch may fall off!
We recommend you double-check that the band is correctly installed before wearing it.
All watch bands will get dirty over time. Dust, food, sweat, lotions and more can affect the look of your watch band. How often a band needs to be cleaned will depend on your situation, but we recommend cleaning as necessary but at least once every 2 weeks.
For this watch band:
For additional information, read out general watch band cleaning guide.
While this band can be used for swimming, please be aware that this band contains stainless steel parts (buckle and adapter). Although stainless steel is extremely durable, it can be damaged by exposure to chlorine – especially when submerged for an extended period of time, and repeatedly, in chlorinated water. Chlorine affects stainless steel because it breaks down what is known as the 'passive film' on the surface of stainless steel. Please make sure you thoroughly clean your watch band immediately after swimming to maximize its lifespan.
If you have any other questions about your watch band, please contact us.