Here are some important information that will ensure your watch band continues to look and perform well for you!
Your band comes with 2 pieces and a mini-screwdriver.
* The above picture is an example only. The color/style shown may be different from what you purchased. Apple Watch not included.
Please use the included mini-screwdriver to check and tighten the screws on the adapters as soon as you receive the watch band (video on how to do this is further down this page).
This video will show you how to remove your original watch band.
This video will show you how to install your new watch band:
Important: Please remember to attach the band to your watch, with the metal middle piece on the under-side of the watch. When the adapter is properly inserted into the groove you should hear a soft click as the watch locks onto the band. If you put it the wrong way around or the band does not "click" in, the band is probably not attached correctly and your watch may fall off! We recommend you double-check that the band is correctly installed before wearing it.
This watch band comes with a mini-screwdriver to help keep your watch band in top condition. This video will show you how to use the screwdriver:
You should check and tighten the adapter screws every 1-3 months, depending on how often you wear your band. If the screw comes off, the adapter will fail and your watch may fall off!
All watch bands will get dirty over time. Dust, food, sweat, lotions and more can affect the look of your watch band. How often a band needs to be cleaned will depend on your situation, but we recommend cleaning as necessary but at least once every 2 weeks.
For this watch band:
For additional information, read out general Apple watch band cleaning guide.
If you have any other questions about your watch band, please contact us.