Here are some important information that will ensure your watch band continues to look and perform well for you!
Your band comes with a link adjustment tool.
* The above picture is an example only. The color/style shown may be different from what you purchased. Apple Watch not included.
There may be some protective plastic film on your band. This is to protect it during shipping and should be removed.
This is a "link" band and may need to have links removed to properly fit your wrist. If you're good with your hands, you can use the included link-adjustment tool to do this yourself. If you're not comfortable doing so, you can easily take it to a local watch store (where you'd go to replace watch batteries) or jeweler, and they should be able to do it for you.
This video will show you how to adjust this watch band.
The Fusion links are thinner than our other bands, so may require some minor wiggling to ensure the adjustment tool's pin enters the hole correctly. This video will explain further:
This video will show you how to remove your original watch band.
Link-style bands can become stressed and break over time if you aren’t installing and removing your band properly. You can read more about how to avoid stressing your watch band.
This video will show you how to properly install your new watch band:
Important: Please remember to attach the band to your watch, with the metal middle piece on the under-side of the watch. When the adapter is properly inserted into the groove you should hear a soft click as the watch locks onto the band. If you put it the wrong way around or the band does not "click" in, the band is probably not attached correctly and your watch may fall off! We recommend you double-check that the band is correctly installed before wearing it.
The micro-screwdriver is not needed. It can be used to remove links (to adjust to fit), but using the blue-colored link adjustment tool is a far easier way to do that.
The spring-bar adjustment tool is not needed. It can be used to remove links (to adjust to fit), but using the blue-colored link adjustment tool is a far easier way to do that.
All watch bands will get dirty over time. Dust, food, sweat, lotions and more can affect the look of your watch band. How often a band needs to be cleaned will depend on your situation, but we recommend cleaning as necessary but at least once every 2 weeks.
For this watch band:
For additional information, read out general watch band cleaning guide.
This band's metal is anodized stainless steel and then coated with a clear protective layer. To keep the band in top condition, avoid:
Wood is a naturally soft material, softer than stainless steel. Be careful not to scratch it directly or indirectly (such as banging the watch band against a harder surface).
While we don't cover such wear-and-tear damage, if you treat the band like your Apple Watch, this band will continue looking great for a long time.
If you have any other questions about your watch band, please contact us.