Here are some important information that will ensure your watch band continues to look and perform well for you!
What you receive
Your band comes with 2 pieces.
* The above picture is an example only. The color/style shown may be different from what you purchased. Apple Watch not included.
How to remove your current watch band
This video will show you how to remove your original watch band.
How to install your new Luxe Leather watch band
This video will show you how to install your new watch band:
Important: Please remember to attach the band to your watch, with the metal middle piece on the under-side of the watch. When the adapter is properly inserted into the groove you should hear a soft click as the watch locks onto the band. If you put it the wrong way around or the band does not "click" in, the band is probably not attached correctly and your watch may fall off!
We recommend you double-check that the band is correctly installed before wearing it.
How to clean your Luxe Leather watch band
All watch bands will get dirty over time. Dust, food, sweat, lotions and more can affect the look of your watch band. How often a band needs to be cleaned will depend on your situation, but we recommend cleaning as necessary but at least once every 2 weeks.
For this watch band:
- Wipe the leather portions of the bands clean with a nonabrasive, lint-free cloth. If necessary, lightly dampen the cloth with fresh water.
- Let the band air dry thoroughly. Do not try to accelerate the drying process with a hair dryer (or other means), as excessive heat may damage the leather.
- Remember that leather bands are not water resistant: leather will rot if it soaks up too much water, or crack when water-soaked leather dries up. So avoid wearing it during exercise (sweat is like water). If the band gets wet because of rain, make sure to air dry it as soon as possible.
For additional information, read out general watch band cleaning guide.
If you have any other questions about your watch band, please contact us.