Watch Band Storage Case Owners Guide

Here is some additional information on how you can make the most of your Watch Band Storage Case!

Watch Band Storage Case Review

Unpacking Instructions

The Watch Band Storage Case does not come with watch bands. Pictures showing watch bands are for illustration purposes only.

When you receive your Storage Case, unzip to open the case. Inside you will find a piece of rigid foam - this is the most essential part of the Storage Case (do not throw it out). Install the foam as follows:

rectangular piece

Step 1

Take the foam out of the storage case and remove the rectangular pieces from each compartment. Each rectangular compartment can store roughly 5 watch bands, so remove the number of rectangles based on how many watch bands you wish to store (e.g. remove 2 blocks if you wish to store up to 10 bands).

Don't worry, you can put the blocks back into place (or remove more blocks) later as needed.


Step 2

Once the pieces are removed, turn the block over to expose the sticky side. You may have wax-paper over the sticky side (if so, remove the wax-paper).

press down

Step 3

Put the sticky-side face down (to stick to the inside of the case). Gently push down to ensure the foam adheres to the case's inner lining.

What Goes Where?

There are three different sections inside the Storage Case to perfectly organize your watch bands.

Elastic straps with small mesh pockets

Elastic straps with small mesh pockets

There are 3 slots, with elastic straps and small mesh pockets. This is a great place to store fragile bands, to keep these bands from rubbing and  scratching against other bands or items.

Middle mesh pocket flap

Middle mesh pocket flap

You can use the middle area to store the watch band tools and other accessories for your Apple Watch such as the cable charger.

Foam compartment

Foam compartment

Each of these foam compartments can store up to 5 watch bands. This photo shows how we can arrange the band in order to fit up to 25 watch bands. The actual number of bands you can store will depend on the thickness and size of each band.

How to Clean Your Watch Band Storage Case

Storage Case will get dirty over time. Dust, oils, and stains can affect the look of your storage case. How often the storage case needs to be cleaned depends on your situation. 

To clean the storage case:

  • Use a damp cloth to wipe off dirt and stains on and inside the storage case
  • Avoid using soap and other chemicals on the storage case. If absolutely needed, make sure to use it sparingly and gently.

Product Warranty

This product is covered by our 1-year Limited Warranty against defects in materials and workmanship. If you have any questions about your product, please contact us — we will be happy to help!

Customer Service

If you have any other questions about your watch band, please contact us.

High Quality & Affordable Epic Apple Watch Bands